Huawei E960 User Manual page 43

the mode of PC obtaining IP address automatically.
W at to do if bridging between two EC506s is unsuccessful h
1. Make sure that the two gateways work on the same channel. For details, see "Selectin
the WLAN Channel."
2. Make sure that the MAC address of one gateway is in the peer MAC address list of
another gateway. For details, see "Configuring Access Attributes of the Client."
When the signal strength is normal, what to do if the downloading
rate is much lower
In this case, you may need to set the value in registry as following procedure.
1. Click Start and then select Run.
2. Type regedit in the Open text box and then click
3. Select Parameters under the following directory:
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip.
4. Select Edit > New > DWORD Value.
OK.
g
37