Table of Contents
Advertisement
3. Repeat the operation with the drill (see figure).
For masonry walls:
4. Insert the 4 metal bushings and tighten the
screws.
5. Fasten the brackets horizontally in the lower set
of holes as illustrated in the figure after having
previously removed the screws.
6. Push the appliance towards the wall and turn the
brackets downwards 90¡. Make sure that the
lower part of the brackets is located between the
appliance and the plate.
7. Insert the second set of screws in the upper
holes and complete the fastening.
For buffer walls (for ex. in sheetrock):
4. Insert the bushings by screwing them into the
holes drilled previously.
5. Fasten the brackets horizontally in the lower set
of holes with the screws as illustrated in the
figure.
6. Push the appliance towards the wall and turn the
brackets downwards 90¡. Make sure that the
lower part of the brackets is located between the
appliance and the plate.
7. Tighten the screws previously loosened and
complete the fastening with the second set of
screws.
Once the appliance is fastened to wall, make sure
that it is stable.
CONTENTS
1,5 cm
D753
D743
51
52
54
54
54
54
54
54
55
55
55
55
56
56
56
56
56
56
15 cm
15 cm
90°
57
57
58
58
58
58
59
59
59
59
59
60
61
61
61
62
62
63
53
Advertisement
Table of Contents
