Table of Contents
Advertisement
3. Turn the bulb socket
counterclockwise to remove it
from the headlamp assembly
and pull it straight out.
4. Unplug the electrical connector
from the old bulb by releasing
the clips on the bulb socket.
5. Pull the old bulb straight out.
6. Push the new bulb straight in
until it clicks to secure it.
7. Plug in the electrical connector
to the new bulb socket.
8. Push the bulb socket straight in
and turn it clockwise to secure it
in the headlamp assembly.
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back up Lamp
To replace one of these bulbs:
1. Open the tailgate. See
.
2. Remove the two rear lamp
assembly screws near the
tailgate latch.
3. Pull the lamp assembly away
from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Holding the socket, pull the old
bulb straight out to release it
from the socket.
6. Push the new bulb straight into
the socket until it clicks.
Advertisement
Table of Contents
