Table of Contents
Advertisement
Headlamp aim has been preset at
the factory and should need no
further adjustment.
However, if the vehicle is damaged
in a crash, the headlamp aim may
be affected. Aim adjustment to
the low-beam headlamps may be
necessary if oncoming drivers flash
their high-beam headlamps at you
(for vertical aim).
If the headlamps need to be
re-aimed, it is recommended that
the vehicle be taken to the dealer
for service.
For the proper type of replacement
bulbs, see
.
For any bulb changing procedure
not listed in this section, contact
your dealer.
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.
A. Low-Beam Headlamp/Daytime
Running Lamps (DRL)
B. High-Beam Headlamp
To replace one of these bulbs:
1. Open the hood. See
.
2. Reach in and access the bulb
sockets from inside the engine
compartment.
Advertisement
Table of Contents
