Tips And Things You Need To Know; Wireless Device Status Leds - Honeywell TB7200 Series Wireless Installation & Integration Reference Manual

WIRELESS INSTALLATION & INTEGRATION REFERENCE GUIDE FOR TB7200/TB7300/TB7600 SERIES THERMOSTATS

TIPS AND THINGS YOU NEED TO KNOW

• Be sure all thermostats communicating to any single WEBs-AX controller are using the same PAN ID and Channel as the
WEBs-AX controller wireless communication card.
• Room Temperature, Outdoor Temperature and Room Humidity need to have their Boolean override counterpart object set to
"Override" first if the present value needs to be written over from the network. Ex To set a network present value on the
numeric "{Room Temperature" numeric object, the "Room Temperature Override" Boolean object needs to be set from Normal
to Override. The thermostat local present value will then be derived from the wireless network instead of the present value at
the thermostat.
• For TB72xx and TB73xx, the currently selected Sequence of Operation Enumeration limits the System Mode usable
Enumeration index. A change in the Sequence Of Operation Enum will set the active system mode and also restrict the usable
range that a local thermostat can accept.
• For TB73xx, Fan Mode Enumerations. Thermostats will not accept all possible index values. TB73xx fan mode input is
dependent on local Fan Configuration parameter. Fan actual current value is read at Fan Status object.
• Each thermostat connected to a wireless network reports to the WEBs-AX controller with an automatic heartbeat for the local
online-offline sanity. Please refer to the health status "Last Ok Time" value for the total amount of time a single thermostat has
not updated its mandatory 3 minutes heartbeat update to the WEBs-AX controller.

WIRELESS DEVICE STATUS LEDS

Wireless Communication Card Status LEDs
WEBs-AX Controller Wireless Card (TB-VWG-APP-1014) LED Status Indicators
1 x ( 200ms ) short blink
2 x ( 200ms ) short blinks
3 x ( 200ms ) short blinks
4 x ( 200ms ) short blinks
4 x ( 200ms ) short blinks
and
1 x ( 1500ms ) long blink
Thermostat and Repeater Wireless Status LEDs
Thermostat Wireless Adapter LED Status Indicators
1 x( 200ms ) short blink
2 x ( 200ms ) short blinks
3 x ( 200ms ) short blinks
4 x ( 200ms ) short blinks
4 x ( 200ms ) short blinks
And
1 x ( 1500ms ) long blink
63-4522—02
Power on
Power on and card memory initialized properly
Power on, card memory initialized properly and serial communication with the WEBs-AX
controller main board active
Power on, card memory initialized properly, serial communication with the WEBs-AX
controller main board active and wireless networks started successfully
Power on, card memory initialized properly, serial communication with the WEBs-AX
controller main board active, wireless networks started successfully and wireless
communication with thermostats active
Power on
Power on and communicating with thermostat
Power on, communicating with thermostat and there is connectivity to wireless network
Power on, communicating with thermostat, connectivity to wireless network and the WEBs-
AX controller is communicating with wireless thermostat
Power on, communicating with thermostat, connectivity to wireless network and the WEBs-
AX controller is communicating with wireless thermostat.
28