Allied Telesis AT-8000GS/48 Datasheet

Datasheet | Switches
AT -8000GS/48
Layer 2 Stackable Gigabit Ethernet Switch
AT -8000GS/48
48 port stackable 10/100/1000T Layer 2
switch with 4 standby SFP bays (unpopulated)
Overview
One of a series of high performance Gigabit
Ethernet stackable switches from Allied Telesis,
the AT-8000GS/48 provides high performance
Layer 2 switching in an affordable fixed
configuration platform.This switch offers 48
10/100/1000 ports, with four fixed 1Gbps SFP
slots plus two integrated stacking connectors
that deliver a total of 20Gbps stacking
bandwidth.The stacking capability integrated
into this platform is configured as a resilient ring
topology designed to provide high reliability
and simplified management for higher port
density applications. Support for jumbo
Ethernet frames enables higher throughput of
time sensitive data.
Near Silent Operation
Specifically designed to be usable in an open
office or retail store environment the
AT-8000GS/48 uses the latest in low power
technologies to minimize both power
consumption and the need for excessive
cooling fans.
Ideal Branch Office and Wiring
Closet Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices.The state-of-the
art QoS capability of this product ensures
reliable delivery of advanced network services
such as voice while effectively controlling the
continually increasing traffic needs found in
today's networks.
Allied Telesis
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis' intuitive yet fully featured Web interface
the advanced features of the AT-8000GS/48 are
accessible to a wide range of system
administrators.The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Secure Management
Only authorized administrators can access the
management interface of the 8000GS series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined part of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
data.
Key Features
Easy,Well Known Management
• Industry standard CLI
• Simple intuitive, full featured Allied Telesis
Web Interface
• Secure encrypted Web and CLI management
with SSHv2 and SSL
• Two levels access privileges
• SNMP
Affordable Truly Stackable 10/100/1000
Switching Platform
• Single IP address stack management
• 20Gig resilient ring stacking architecture
• Across stack link aggregation
• Across stack VLAN configuration
• Across stack port mirroring
• Redundant standby stack master
All the QoS Needed in the Wiring Closet
for Today's Voice and Data Networking
• Eight priorities assigned to four queues
• IEEE 802.1p for Layer 2 QoS
• DSCP (DiffServ) for Layer 3 QoS
• IEEE 802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
• Layer 2 and Layer 3 Access Control Lists (ACL)
Securing the Network at its Most
Vulnerable Point
• IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
• Guest VLAN: to ensure visitors or unauthorized
users connect only to services defined by IT. E.g.
Internet
• TACACS+: for ease of management security
administration
• Layer 2 and Layer 3 Access Control Lists (ACL)
• Port MAC Address security options
www.alliedtelesis.com