The Door Will Not Open - Zanussi FJE 1207 User Manual

Problem

• The door will not open:

• Spinning starts late or the
laundry is not spun enough:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Possible cause
• The programme is still running, the drum is turning.
• The door lock has not yet released (door locked
light on).
• The water level is above the bottom edge of the door.
• The machine is heating the water.
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after few minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed or will not
spin. If at the end of the programme the laundry is
not spun enough, redistribute the load manually
and select the spin programme.
23