SENAO EP801 User Manual page 29

f. Press "6" to set Language:
Use or to scroll through option 1~3 (1.English
(1)
2.Spanish 3.French ). Default is "English".
Press SAVE (Left) soft key to confirm selection.
(2)
g. Press "7" to set Custom Name:
(1) Enter characters using the Character Table and method
discussed in the Phonebook section.
(2) Use or to move the cursor backward or forward to
insert (to the left of the cursor) or delete (the character above the
cursor, or left of the cursor if cursor is on the right of the last
character).
(3) Press SAVE (Left) soft key to confirm setting.
Re: Once entering the custom name, the greeting of LCD in standby
mode will be changed as the entering.
h. Press "8" to Change Password:
Enter original password (4 digits) when enter this menu.
(1)
Enter new password then press
(2)
new password.
i. Press "9" to set Headset Ring: See Headset Ring operation on Page
52.
7. Press "6" to set Base Settings:
When enter this menu, you must enter PIN code first (4 digits).
Re: The PIN code is for Base Settings.
a. Press "1" to set DTMF Duration.
Enter the DTMF duration (90~200ms), press
(1)
confirm the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration
not match with PSTN or PBX setting, it may operate faultily.
b. Press "2" select flash key timing. Default is 600ms.
Use or to scroll through option 1~9 (100~900ms).
(1)
Press SELECT (Left) soft key to confirm selection.
(2)
Re: The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
Press "3" to set Assign Next HS
c.
Enter 2-digit handset ID followed by pressing
(1)
When register a new handset, the base will assign the specific
(2)
handset ID which assigned in advance to the new handset.
d. Press "4" to set Clear HS
Enter 2-digit handset ID followed by pressing
(1)
The base will erase the handset ID from system.
(2)
SAVE (Left) soft key to confirm
OK (Left) soft key to
OK (Left) soft key.
OK (Left) soft key.
~57~
e. Press "5" to Change PIN:
Enter the new PIN followed by
(1)
Re: Default PIN is "0000".
f. Press "6" to set Auto Hang Up:
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
Re: When setting "on", the EP801 will automatically hang up if the far
end caller hung up already. However, this function depends on if
there is "Line Reversal" signal sent out by PBX or PSTN, after the
call hung up.
g. Press "7" to Set Time to support DTMF Caller ID:
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
8. Press "7" to register, de-register handset and set Multi-Base: see Handset
Registration operation on Page 37, and Multi-base Setting on Page 50.
9. Press "8" to set Menu Display:
To avoid mis-setup of Call Settings (MENU-4), Phone Settings (MENU-5)
and Base Settings (MENU-6), you can hide these menus, so that other
handset users won't have chance to mis-settup these settings.
Re: When entering the Menu Display, you have to enter password first.
a. Press "1" to set hiding/un-hiding of the Call Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
b. Press "2" to set hiding/un-hiding of the Phone Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
c. Press "3" to set hiding/un-hiding of the Base Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
d. Press "4" to set hiding/un-hiding of the Multi-base Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
Re: Select "On" means the menu will be displayed on screen. Select "Off"
means the menu will be hidden.
OK (Left) soft key.
~58~