Table of Contents
Advertisement
product. For more detailed information about
recycling of this product, please contact your
local council, your household waste disposal
Something not working
The dishwasher will not start or stops during
operation.
Certain problems are due to the lack of simple
maintenance or oversights, which can be
solved with the help of the indications described
in the chart, without calling out an engineer.
Fault code and malfunction
• continuous flashing of the start/cancel indicator
light
• 1 flash of the end of programme indicator light
The dishwasher does not fill with water
• continuous flashing of the start/cancel indicator
light
• 2 flashes of the end of programme indicator light
The dishwasher will not drain
• continuous flashing of the start/cancel indicator
light
• 3 flashes of the end of programme indicator light
18
service or the shop where you purchased the
product.
Switch off the dishwasher, open the door and
carry out the following suggested corrective ac-
tions.
Possible cause and solution
• The water tap is blocked or furred with limescale
Clean the water tap
• The water tap is turned off
Turn the water tap on
• The filter (where present) in the threaded hose fitting
at the water inlet valve is blocked
Clean the filter in the threaded hose
• The water inlet hose has not been correctly laid or
it is bent or squashed
Check the water drain hose connection
• The sink spigot is blocked
Clean out the sink spigot
• The water drain hose has not been correctly laid or
it is bent or squashed
Check the water drain hose connection
• Anti-flood device is activated
Close the water tap and contact your local Service
Force Center.
Hide quick links:
Advertisement
Table of Contents
