Specifi Cations - Casio DT-X30 R-50C User Manual

Do not subject the Handheld Terminal and Ethernet Cradle to vibration or
impact during communication. This can cause communication to be interrupted.
When placing the DT-X30 into the cradle, make sure that it is seated properly
and that the power LED at the front of the Ethernet Cradle is lit in green.
Charging and communication will not proceed properly if the Handheld
Terminal is not seated properly.
Always cap ports that are not being used. Using the Ethernet Cradle while the
ports are uncapped can cause damage.
Specifi cations
1. LAN Specifi cations
Communications protocol: IEEE 802.3
Media type:
2. USB
Protocol:
Transmission Rate:
3. Charging
Charging Method:
Charge Period:
4. Power Supply
Power Source:
Consumption Current:
Output to Handheld Terminal: 9.5V DC 2.7A (max.)
USB Host Output:
5. AC Adaptor
Model:
Input:
Output:
6. Dimensions and Weight
Dimensions:
Weight:
7. Operating Environment
Temperature:
Humidity:
*See page 39.
E-42
10base-T/100base-TX auto-switched
USB Ver1.1 Standard
12Mbps (max.)
Constant current/voltage (the charging circuit is built in
DT-X30)
Approximately 5 hours
AC adaptor (AD-S42120B*)
12V DC approximately 3.0A
5V DC 0.5A (max.)
AD-S42120B
100V to 240V AC 50/60Hz 1.2A
12V DC 3.5A
Approximately 120(W) 144(D) 129(H) mm
(4 "W 5
Approximately 300g (10.6oz)
0°C to 40°C (32°F to 104°F)
30% to 80% RH (non-condensation)
"D 5 "H)