Table of Contents
Advertisement
Using the Car Mounted-type Battery Charger (HA-G35CHG)
The optionally available Car Mounted-type Battery Charger (HA-G35CHG) can be
used to charge the battery installed in the Handheld Terminal using power from the
cigarette lighter in your car.
General Guide
Left
2
1
AC Adaptor Jack
2
Removal Buttons
3
Terminal Detect
Switch
4
Power Contacts
5
Power LED
Top
4
Front
2
Connect the Car Power Cable (bundled) here.
Press when removing the DT-X30.
This switch detects when the DT-X30 is mounted correctly on the
charger.
Power is supplied to the DT-X30 via these contacts.
This LED indicates the power status and the mountting status of
the DT-X30.
Off: DT-X30 is not installed
Green: Power on, DT-X30 mounted correctly
Back
2
3
5
2
1
E-45
Advertisement
Table of Contents
