Using the Screen Cover as a Stand
1. Disengage the rubber bands from the tablet, open the cover and place it on a desktop
or other fl at surface.
2. Turn the tablet so that it faces forwards and fi t the bottom into the notch in the cover
to fi x it in place.
Important!
•
The screws cannot be removed from the screen cover.
•
The screen cover is a synthetic leather product, so any moisture on the cover
should be immediately be wiped off gently with a soft, dry cloth.
Note also that it is sensitive to heat and should not be used close to a fi re or
similar location.
•
Do not hold the tablet by the screen cover alone while the rubber bands are not
fastened around the tablet. Doing so could damage the screen cover.
•
When fi tting the tablet into the cradle, lift up the screen cover slightly so that the
tablet fi ts securely into the cradle.
E-108
Notch