HeadRoom Micro Amp Owner's Manual page 8

Connecting the Micro Amp to Analog source:
Source with line out or headphone jack:
Hook the Micro Amp to your iPod, portable CD player, or any other source with a head-
phone jack using a mini-mini cable. If your source happens to have a line-output, then
even better; use the line output rather than the headphone jack (using line-out will com-
pletely bypass the player's volume control).
Simply run the mini-mini cable from the line-out or headphone jack of your player into
line input '1' or '2' on the back of the amp. On the front panel, switch the input selector
switch to the corresponding line input you are using.
Source with RCA outputs:
If your CD player has a set of RCA outputs, an RCA to Mini Cable will allow you to con-
nect the RCA outputs of your player into one of the line inputs on the Micro Amp. Be
sure to note that as always, red or 'R', designates right channel on RCA inputs. On the
front panel, switch the input selector switch to the corresponding line input you are
using.
line inputs
1& 2
- +
+/- 15 VDC power input
Now, for the best part: simply plug your headphones into the headphone jack on the
front of the Micro Amp (be sure to turn the volume down first). If your headphone
jack is a 1/4" termination, or if you need to power more than one pair of headphones,
please see our explanation in #1 on page 2.
8
Connecting Your Micro Amp
source
- +
-
+
Micro Amp
line inputs 1 & 2
- +
+/- 15 VDC power input
Portable
cable
Headphone input
Home CD player
with RCA outputs