Creative Blaster 2030 User Manual page 38

After you have installed the
Wireless LAN USB Adapter's
drivers, you must configure
the Wireless LAN USB
Adapter's settings. See
"Configuring the Wireless LAN
USB Adapter" on page 4-1.
11.When the dialog box similar to
Figure 3-31 appears, click the
Finish button. If prompted, restart
your computer.
Congratulations! You have successfully
installed the Wireless LAN USB Adapter's
drivers and Configuration Utility. The
Configuration Utility icon appears on the
taskbar near the clock (see Figure 3-32).
To close Configuration Utility, right-click its
icon, and select Exit.
Figure 3-31:BritePort Wireless LAN USB Adapter
Setup Program dialog box
Figure 3-32:Configuration Utility
Installing and Uninstalling Drivers and Configuration Utility
icon
3-18