Table of Contents
Advertisement
NETWORK SETUP
Network Setup allows the user to adjust settings such as Ports, setup emergency PPP information for use with the Emergency Agent
and enable Remote Access.
Use with Remote
Connections
Enable RS-232
Keyboards (PTZ)
Time Out Value
Emergency Port
Center Port
Note
Center Port 1025 is not available for remote connections. It is used by the ATI VGA management suite
Image Port
Search Port
Note
If connecting to the DVR through a firewall, the above ports must be open to incoming and outgoing traffic.
Resolution
Transport Rate
Settings for Video Sent to Remote Client
When attempting to connect to the DVR, if the connection does not succeed during the timeout
period (seconds), the connection will be terminated.
Used to connect to the Alarm Monitor software.
Used to connect to the Surveillix remote software. This port must be specified in the Remote
Software to connect to the DVR.
Used to transfer the video to the Surveillix remote software.
Used to transfer search information to the Surveillix remote software.
By setting the resolution low, the images will be sent faster, however, the image quality will be
reduced considerably. When set to Original, full quality video will be sent [720 x 480 (NTSC) 720 x
576 (PAL)]. The Original setting is very bandwidth intensive.
Throttles the bandwidth on the DVR. This option is based on percentages of images sent.
Use
with
Emergency Agent
Between DVR and Remote Client
59
Advertisement
Table of Contents
