Advertisement
Toshiba RemotEye II Configuration
Main Menu → ( 1) T oshiba RemotEye II Configuration (see Figure 5: Console Configuration
Menu Description).
+==================================================================+
|
[ TIC RemotEye II Configuration Menu ]
+==================================================================+
1. System Group
2. Control Group
3. Parameter Group
4. Email Group
5. EMD Group
0. Return to previous menu
Please Enter Your Choice =>
Figure 5: Console Configuration Menu Description
System Group
Main Menu →(1)Toshiba RemotEye II Configuration → ( 1) S ystem Group (see Figure 6: Console
System Group Menu Description).
The System Group provides access to the system settings listed below. The settings may be
viewed or changed from this screen. When using the Dynamic Host Configuration Protocol
(DHCP), items 1 – 3 will be retrieved automatically.
+====================================================================+
|
+====================================================================+
RemotEye II Agent Version : TIC RemotEye II v3.00
Ethernet address
1. Ip Address
2. Gateway Address
3. Network Mask
4. Date and Time
0. Return to previous menu
Please Enter Your Choice =>
Figure 6: Console System Group Menu Description
Making the Network Connection
Each Ethernet network is different. Therefore, the following steps should be used as an outline
for connecting the RemotEye II to a network:
a) Connect one end of a Category 5 cable to the NETWORK RJ45 receptacle of
RemotEye II.
b) Connect the other end of the Category 5 cable to a designated network switch or hub. A
network administrator will allocate an available port.
c) Verify a network link has been established. On RemotEye II/External, confirm Traffic
LED on RemotEye II is illuminated. On RemotEye II/Internal, confirm the leftmost,
green LED is illuminated
[ System Group Menu ]
: 00 E0 D8 08 80 0D
: 172.18.1.63
: 172.18.1.1
: 255.255.240.0
|
|
Document 60763-000
Advertisement
