Before Use; Operating Instructions - Binatone ST-900X Instruction Manual

Sandwich toaster
Table of Contents

Advertisement

Available languages

Available languages

the appliance (1) with a damp cloth and wash the
removable plates (8,9) with lukewarm soap wa-
ter. Allow the appliance to dry.

OPERATING INSTRUCTIONS

1. To remove the plates from the appliance, move
2. Look carefully at the Sandwich Toaster plates. The wide projec-
tions on the plate are called (10) stops, and the narrow ones
clamps (11), see Figure C.
Attention: the removable plates of the Toaster can be
installed in one way only. A plate where the distance
between the stops (10) is bigger is placed on the
bottom part of the appliance; and the plate where the
distance between the stops (10) is less is placed on
the top part of the appliance.
To secure the plates in the Sandwich Toaster, fit the stops of the
plates (10) into the corresponding slots as illustrated in Figure B and
lower the plate down until it clicks. Make sure that the plate is prop-
erly fixed in the Toaster. Secure the second plate on the top part of the
appliance in a similar manner.
Use of the Removable Plates for Making
1. Place the Toaster on a dry, smooth and flat horizontal surface.
2. Install the removable sandwich plates (8) as described in these
Instructions.
3. Connect the unit to a mains supply with the voltage corresponding
to the voltage indicated on the unit. When the unit is plugged in,
the indicator light (4) will come on. Allow the appliance to pre-
heat for 5 to 8 minutes. Once the indicator light (5) is on, you can
start making sandwiches.
4. When the appliance is heated, open it, spread margarine or any
other cooking fat on the Toaster plates (8) and place a slice of
bread on the bottom plate of the appliance. Use 1 cm thick square
bread.
5. Fill the sandwich (for example, cheese) and top with the second
slice of bread. It is advisable to spread butter over the second slice
of bread (buttered side up) in order to avoid its burning.

BEFORE USE

Before using for the first time, wipe the case of
Change of the Appliance Plates
the plate fixing button (6) to the side up to the
stop, hold the plate on the side and raise it as
shown in Figure B, then, take it off. Remove
the top plate in a similar manner.
Sandwiches

Advertisement

Table of Contents
loading

Table of Contents