Yamaha RHINO 660 Owner's Manual page 31

WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 4WD-LOCK ("DIFF.LOCK"), or
vice-versa while the vehicle is moving.
WHAT CAN HAPPEN
The vehicle handles differently in 2WD
than in 4WD and in 4WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 4WD to 4WD-LOCK, or
vice-versa while moving may cause the
vehicle to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the vehicle before chang-
ing from 2WD to 4WD or from 4WD to
4WD-LOCK, or vice-versa.
On-Command four-wheel drive switch
"2WD"/"4WD"
1. Lever
2. On-Command four-wheel drive switch "2WD"/"4WD"
To change from 2WD to 4WD, stop the vehi-
cle, and then set the switch to "4WD". When
the vehicle is in 4WD, the 4WD indicator light
" " will come on. To change from 4WD to
2WD, stop the vehicle, be sure the lever is set
to position a, and then set the switch to
"2WD".
4-8