Engine Preparation - Yamaha G21A Owner's/Operator's Manual

STORAGE

ENGINE PREPARATION

1
With the key removed and the spark
plug lead disconnected, turn the
clutch by hand until compression is
2
felt. This puts the valves in the closed
position.
3
CHASSIS
PREPARATION
4
1. Increase the front tire pressure to
23 psi (160 kPa, 1.6 kgf/cm 2 ) and
increase the rear tire pressure to
31 psi (217 kPa, 2.2 kgf/cm 2 ).
5
2. Clean exterior of the utility car and
apply a rust inhibitor.
6
3. Cover the utility car with a breath-
able cover and store it in a dry,
well-ventilated area.
7
8
9
10
11
9-2
BATTERY
PREPARATION
1. Remove the battery from the utility
car and store it in a cool, dry place
that stays between 32˚F (0˚C) and
90˚F (30˚C).
2. Have the battery recharged every
60-90 days to keep it fully
charged. The battery must be kept
fully charged to avoid damage.
:
NOTE
Batteries like the one supplied with
your car normally do not require you to
check the water level inside the bat-
tery for the one year warranty
period provided by the manufacturer.
UTILITY