Yamaha KODIAK 4X4 Ultramatic Owner's Manual page 30

1. Four-wheel drive switch "2WD/4WD"
EBU00060
On command four-wheel drive switch
"2WD/4WD"
To change from two-wheel drive (2WD) to
four-wheel drive (4WD), stop the ATV and set
the switch to the 4WD position.
To change from four-wheel drive (4WD) to
two-wheel drive (2WD), stop the ATV and set
the switch to the 2WD position.
POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 2WD while the ATV is moving.
WHAT CAN HAPPEN
The ATV handles differently in 2WD
than in 4WD in some circumstances.
Changing from 2WD to 4WD or from
4WD to 2WD while moving may cause
the ATV to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing
from 2WD to 4WD or vice-versa.
4-8
WARNING