Table of Contents
Advertisement
To adjust the focus of the lens, you need to turn the lens slowly in either clockwise or anti-clockwise direction until
the desired image appears. DO NOT over turn the lens in either of the directions as it will be out of focus.
Adjust IP Security Cam Focus
You can further adjust the IP Security Cam's image quality through System
Administration – Image of Web Configuration. Please refer to Web Configuration
section for further details.
Direct exposure to sunlight may cause permanent damage to the CMOS sensor.
Therefore do not expose the IP Security Cam's lens directly to sunlight. When operation
is required in glaring light environment, it is recommended to use an iris lens.
The IP Security Cam is designed for indoor usage and if your application requires
prolong exposure to sunlight, a sun visor is recommended to protect the IP Security Cam.
55
IP Security Cam
Appendix D
Advertisement
Table of Contents
