Yamaha BIG BEAR 400 Owner's Manual page 98

NO. ITEM
Drive shaft univer-
9 *
sal joint
10 * Chassis fasteners
Shock absorber as-
11 *
semblies
12 * Stabilizer bushes
13 * Knuckle pivots
14 * Steering shaft
15 * Steering system
8
16 * Axle boots
17 Engine oil
Engine oil filter ele-
18
ment
19 Engine oil strainer
20 Differential gear oil
CHECK OR MAINTENANCE
JOB
• Lubricate with lithium-soap-based grease.
• Make sure that all nuts, bolts, and screws are
properly tightened.
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
• Check for cracks or other damage, and replace if
necessary.
• Lubricate with lithium-soap-based grease.
• Lubricate with lithium-soap-based grease.
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
• Check for cracks or other damage, and replace if
necessary.
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
• Clean or replace if necessary.
• Clean.
• Change.
• Check ATV for oil leakage, and correct if neces-
sary.
month 1
Whichev-
er comes
km 320
first
(mi) (200)
hours 20
√
√
√
√
√
√
√
8-6
INITIAL EVERY
3 6 6
1300 2500 2500 5000
(800) (1600) (1600) (3200)
80 160 160
√ √
√ √ √
√ √
√ √
√ √
√ √
√ √ √
√ √ √
√ √
√
√
12
320
√
√
√
√
√
√
√
√
√
√
√
√