Measuring The Tire Pressure - Yamaha BIG BEAR 400 Owner's Manual

Hide thumbs Also See for BIG BEAR 400:
Table of Contents

Advertisement

G
Tire pressure below the minimum speci-
fied could cause the tire to dislodge from
the rim under severe riding conditions.
Minimum tire pressure:
Front:
22.0 kPa (3.2 psi) (0.220 kgf/cm²)
Rear:
22.0 kPa (3.2 psi) (0.220 kgf/cm²)
G
Use no more than the following pressures
when seating the tire beads.
G
Maximum tire seating pressure:
Front:
250 kPa (36 psi) (2.5 kgf/cm²)
Rear:
250 kPa (36 psi) (2.5 kgf/cm²)
Higher pressures and fast inflation may
cause a tire to burst. Inflate the tires very
slowly and carefully.
EBU19820

Measuring the tire pressure

Use the low-pressure tire gauge.
NOTE:
The low-pressure tire gauge is included as stan-
dard equipment. Make two measurements of the
tire pressure and use the second reading. Dust or
dirt in the gauge could cause the first reading to be
incorrect.
1. Low-pressure tire gauge
Set the tire pressure when the tires are cold. Set
the tire pressures to the following specifications:
5-6
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm40fbwYfm40fbx

Table of Contents