Auxiliary Dc Jack - Yamaha BIG BEAR 400 Owner's Manual

EWB00350
POTENTIAL HAZARD
Improper shock absorber assembly adjust-
ment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
4
accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.
EBU19180

Auxiliary DC jack

The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
1. Set the light switch to "OFF".
2. Start the engine. (See page 6-1.)
3. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
WARNING
1. Auxiliary DC jack
2. Auxiliary DC jack cap
Maximum rated capacity for the auxiliary DC
jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not being used,
cover it with the cap.
ECB00120
CAUTION:
G
Do not use accessories requiring more than
the above maximum capacity. This may
overload the circuit and cause the fuse to
blow.
4-23