Auxiliary Dc Jack - Yamaha BIG BEAR YFM400NN Owner's Manual

EBU00748

Auxiliary DC jack

The auxiliary DC jack is located at the front
right side of the ATV. The auxiliary DC jack
can be used for suitable work lights, radi-
os, etc. The auxiliary DC jack can only be
used when the main switch is in the "ON"
position.
1. Turn the headlight switch to the "OFF"
position.
2. Start the engine. (See pages 6-1 ~ 6-3.)
3. Open the auxiliary DC jack cap and in-
sert the accessory power plug into the
jack.
Maximum rated capacity for the
auxiliary DC jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not be-
ing used, cover it with the cap.
1. Auxiliary DC jack
4-19
2. Cap