Engine Oil - Yamaha BIG BEAR YFM400NN Owner's Manual

EBU00772

Engine oil

Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several min-
utes, and then stop it.
3. Remove the dipstick, and then wipe it
off with a clean rag. Insert the dipstick
in the filler hole without screwing it in.
1. Dipstick
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. Remove the dipstick, and then check
the oil level.
5. The oil level should be between the
maximum and minimum marks. If the
level is low, add oil to raise it to the
proper level.
CAUTION:
Be sure no foreign material enters the
crankcase.
1. Maximum level mark
8-5
2. Minimum level mark