Final Gear Oil - Yamaha BIG BEAR YFM400NN Owner's Manual

EBU00705

Final gear oil

Final gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the
oil level. It should be up to the brim of
the hole. If the level is low, add oil to
raise it to the proper level.
CAUTION:
Be sure no foreign material enters the final
gear case.
3. Install the oil filler bolt and tighten to
the specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kg, 17 ft·lb)
1. Final gear oil
Final gear oil replacement
1. Remove the final gear case cover.
8-9
2. Correct oil level 3. Oil filler bolt