Auxiliary Dc Jack - Yamaha BIG BEAR 4X4 YFM40FP Owner's Manual

EBU00748

Auxiliary DC jack

The auxiliary DC jack is located at the front
right side of the ATV.
The auxiliary DC jack can be used for suitable
work lights, radios, etc.
The auxiliary DC jack can only be used when
the main switch is in the "ON" position.
1. Turn the headlight switch to the "OFF"
position.
2. Start the engine. (See pages 6-1 ~ 6-3.)
3. Open the auxiliary DC jack cap and insert
the accessory power plug into the jack.
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not being
used, cover it with the cap.
1. Auxiliary DC jack
4-20
2. Cap