Final Gear Oil - Yamaha BIG BEAR 4X4 YFM40FP Owner's Manual

EBU00825

Final gear oil

Final gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the oil
level. It should be up to the brim of the
hole. If the level is low, add oil to raise it to
the proper level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
3. Install the oil filler bolt and tighten it to the
specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lb)
1. Final gear oil 2. Correct oil level
Final gear oil replacement
1. Remove the final gear case cover.
1. Final gear case cover
8-9
3. Oil filler bolt