Spark Arrester Cleaning - Yamaha RAPTOR 350 Owner's Manual

EBU13571

Spark arrester cleaning

Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the bolt.
1. Bolt
2. Remove the tailpipe by pulling it out of
the muffler.
3. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe and inside of the tailpipe housing.
1. Tailpipe
4. Insert the tailpipe into the muffler and
align the bolt holes.
5. Install and tighten the bolt.
8-16
2. Spark arrester