Yamaha BANSHEE Owner's Manual page 85

Lean towards
inside of turn.
This procedure should be practiced at slow
speed many times in a large off-road area
with no obstacles. If an incorrect technique is
used, your ATV may continue to go straight. If
the ATV doesn't turn, come to a stop and then
practice the procedure again. If the riding sur-
face is slippery or loose, it may help to posi-
tion more of your weight over the front wheels
by moving forward on the seat.
Once you have learned this technique you
should be able to perform it at higher speeds
or in tighter curves.
Support your
weight on the
outer footboard.
Improper riding procedures such as abrupt
throttle changes, excessive braking, incorrect
body movements, or too much speed for the
sharpness of the turn may cause the ATV to
tip. If the ATV begins to tip over to the outside
while negotiating a turn, lean more to the
inside. It may also be necessary to gradually
let off on the throttle and steer to the outside
of the turn to avoid tipping over.Remember:
Avoid higher speeds until you are thoroughly
familiar with the operation of your ATV.
7-24