Spark Arrester Cleaning - Yamaha BANSHEE Owner's Manual

EBU13611

Spark arrester cleaning

Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the screws.
q
1. Screw (× 3)
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon deposits
from the spark arrester portion of the
tailpipe.
w
e
1. Tailpipe
2. Spark arrester
3. Gasket
4. Make sure the gasket is properly posi-
tioned, then insert the tailpipe into the
muffler and align the screw holes.
5. Install the screws and tighten them.
8-17
q