Something Not Working - Electrolux EW 1230 I Instruction Manual

SOMETHING NOT WORKING?

If the machine does not start up:
check that the door is firmly shut;
check that the appliance is plugged in
check that the mains fuse is intact;
check that the programme selector dial is correctly
positioned and the ON/OFF button has been
depressed.
If the machine does not fill:
is the tap on?
is water coming out of the tap? Check.
is the inlet hose squashed or bent?
is the filter of the inlet hose clogged?
is the loading door open?
is the door closed?
If the machine empties as it fills:
the end of the drain hose is too low.
If the machine does not drain and/or does
not spin:
is the drain hose squashed or bent?
is the drain filter clogged?
have you selected a gentle programme that stops
with the last rinse water in the tub?
If there is water on the floor:
too much detergent or unsuitable detergent? The
formation of foam can cause water leaks.
is one of the joints or the tap leaking? It is not
always easy to see as the leak often runs along
the hose.
If the machine vibrates or is too noisy:
have all the transit bolts and packing been
removed?
is the machine touching something?
are all the feet resting firmly on the ground? Have
the lock nuts been secured?
If you are unable to identify or solve the problem,
consult our servicing department. Before telephoning,
make a note of the make, model and date of purchase
of your machine: the Service Department will require
this information.
Rating plate
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
91