EBU00825
Final gear oil
Final gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the oil
level. It should be up to the brim of the
hole. If the level is low, add oil to raise it to
the proper level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
3. Install the oil filler bolt and tighten it to the
specified torque.
Tightening torque:
Oil filler bolt:
25 Nm (2.5 m·kg, 18 ft·lb)
1. Filler bolt
2. Final gear oil
Final gear oil replacement
1. Remove the final gear case cover.
8-9
3. Correct oil level