10. Warm up the engine for several minutes
at idle speed. Check for oil leakage while
warming up.
CAUTION:
_
If oil leakage is found, stop the engine im-
mediately and check for the cause.
_
Oil pressure check
1. Put a cloth around the cylinder.
2. Slightly loosen the oil gallery bolt in the
cylinder head.
3. Start the engine and keep it idling until oil
begins to seep from the oil gallery. If no
oil comes out after one minute, turn the
engine off so it will not seize and find the
cause.
4. Start the engine, and then check the oil
pressure.
5. After checking, tighten the oil gallery bolt
to the specified torque.
1. Oil gallery bolt
Tightening torque:
Oil gallery bolt:
7 Nm (0.7 m·kg, 5.1 ft·lb)
CAUTION:
_
Be sure to check the oil pressure after re-
placing the engine oil.
_
8-8
2. Cloth