Engine Oil - Yamaha WOLVERINE YFM350FXP Owner's Manual

EBU00772

Engine oil

Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes,
and then stop it.
3. Remove the dipstick, and then wipe it off
with a clean rag. Insert the dipstick in the
filler hole without screwing it in.
1. Dipstick
NOTE:
_
Wait a few minutes until the oil level settles
before checking.
_
4. Remove the dipstick, and then check the
oil level.
5. The oil level should be between the max-
imum and minimum marks. If the level is
low, add oil to raise it to the proper level.
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_
1. Maximum level mark
8-5
2. Minimum level mark