Download Print this page

Advertisement

25
25-3/30
2) Adjust the throttle stop-screw to set
NOTE:
q
Correct idling-speed adjustment is only
204023
possible if the engine is fully warmed-up.
If not warmed up fully, the speed setting
will tend to be too high. If you have diffi-
culty obtaining the specified idle, consult
q
a Yamaha dealer or other qualified
mechanic.
1 Throttle stop-screw
w
EMK58010
CHECKING WATER DRAIN UNDER
ENGINE OIL TANK
A translucent water drain hose is connect-
ed from the bottom of the oil tank to the
filler neck. If water or foreign matter col-
q
lects in this hose, immediately remove
the hose at the filler neck and drain the
contaminants.
1 Hose
2 Filler neck side
4-17
the idling speed to specification (see
"SPECIFICATIONS") by turning the
stop-screw clockwise to increase the
idling speed, and turning it counter-
clockwise to decrease the idling
speed.
E

Advertisement

This manual also for:

30a

Comments to this Manuals

Symbols: 0
Latest comments:
  • Wilfred Sep 07, 2016 10:16:
    I have 3hp yamaha outboard motor and the steering friction adjuster screw is out and I am not able to rescrew it. Need help on this