4) Change the lower unit oil. (Refer to
"CHANGING GEAR OIL"). Inspect the
oil for the presence of water which
indicates a leaky seal. Seal replace-
ment should be performed by an
authorized Yamaha dealership prior
to use.
5) Grease all grease fittings. (Refer to
"GREASING")
EMK27011
Cleaning and Anti-corrosion Measure
1) Wash down the exterior of the out-
board with fresh water and dry off
completely.
2) Spray the engine's exterior with
"Yamaha Silicone Protectant" (Part
No. LUB-SILCNE-13-00).
3) Wax the cowling with a non-abrasive
wax such as "Yamaha Silicone Wax"
(Part No. ACC-11000-15-02).
4-8
E