Yamaha YZF Owner's Manual page 36

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Compression damping force adjusting screw
2. Position indicator
Compression damping force
To harden the compression damping,
decrease the setting by turning the ad-
justing screw. To soften the compres-
sion damping, increase the setting by
turning the adjusting screw. Make sure
that the position indicator is aligned
with the appropriate setting.
CI-10E
Minimum (soft)
Standard
Maximum (hard)
WARNING
@
This shock absorber contains high-
ly pressurized nitrogen gas. For
proper handling, read and under-
stand the following information be-
fore handling the shock absorber.
The manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G Do not tamper with or attempt to
open the gas cylinder.
G
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
G
Do not deform or damage the
gas cylinder in any way, as this
Setting
will result in poor damping per-
6
formance.
4
G
Always have a Yamaha dealer
1
service the shock absorber.
@
EAU00315
3-15