Speedometer Unit - Yamaha YZF-R6 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Speedometer
2. Clock/odometer
3. "RESET" button
4. "SELECT" button

Speedometer unit

The speedometer unit is equipped with
the following:
a digital speedometer
shows riding speed)
an odometer (which shows the to-
tal distance traveled)
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
a clock
NOTE:
@
For the U.K. only:
To switch the speedometer display be-
tween kilometers and miles, press the
"SELECT" button and "RESET" button
together for at least two seconds.
@
Odometer and tripmeter modes
EAU03244
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
(which
"TRIP 1" and "TRIP 2" in the following
order:
ODO TRIP 1
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "TRIP F" and
start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
TRIP F
TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km.
Clock mode
To change the display to the clock
mode, push the "SELECT" button for at
TRIP 2 ODO
least one second.
To change the display back to the prior
mode, push the "SELECT" button.
3-5
TRIP 1 TRIP 2 ODO