Tail/Brake Light; Replacing A Turn Signal Light Bulb; License Plate Light - Yamaha Roadliner XV1900AV Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Tail/brake light

This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6
EAU24180
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-27
EAU38380

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
ECA11190
EAU24330