Battery Notice - VTech CYBER SPY NOTEBOOK User Manual

BATTERY NOTICE

• The use of new alkaline batteries is recommended for maximum
performance.
• Do not try to recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before being
charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Do not mix new and used batteries.
• Only use batteries of the recommended or equivalent type.
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Batteries that have run out of energy must be removed from the toy.
• Do not short circuit the supply terminals.
• Do not use more batteries than recommended.
• Remove batteries from the toy if it will not be used for an extended
period of time.
• Do not dispose of batteries in fire.
Notice: When Cyber Spy Notebook™ is on, you may see this icon
appear on the screen
and you should replace the batteries soon.
AC-DC ADAPTOR
Use a VTech
EN61558 DC 9V
CONNECTING THE ADAPTOR
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the right side of the unit.
3. Insert the adaptor plug into the unit's adaptor jack.
4. Plug the adaptor into a wall outlet.
5. Turn the unit ON.
NOTE: When the toy is not going to be in use for an extended period of
time, unplug the adaptor.
4
. This indicates that battery power is low,
adaptor or any other standard adaptor that complies with
®
300mA center-positive adaptor.