Setup Menu Setting; General Operation - VIETA CPD1010TD Owner's Manual

SETUP Menu Setting

General Operation&General Setup Page

General Operation

1.Press SETUP to enter the Setup Menu.
2.Press ENTER to enter the next level submenu or confirm your
selection.
3.Press to enter the submenu or returen to the previous menu
4.Press to highlight the desired menu.
To exit from the menu
Press SETUP The settings will be stored in the player's memory
even if the player is switched off.
General Setup Page
The options included in General Setup page are:"TV DISPLAY",
"ANGLE MARK","OSD LANGUAGE","CLOSED CAPTIONS",
"SCREEN SAVER",Follow the steps below:
Dolby
- - GENERAL SETUP PAGE - -
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
DITITAL OUTPUT
CLOSED CAPTIONS
SCREEN SAVER
GO TO GENERAL SETUP PAGE
1.Press SETUP to enter the setup menu.
2.Press to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
Dolby
- - GENERAL SETUP PAGE - -
TV DISPLAY PS 4:3 PANSCAN
4:3 LETTERBOX
ANGLE MARK
16:9
OSD LANGUAGE
DITITAL OUTPUT
CLOSED CAPTIONS
SCREEN SAVER
SET TV DISPLAY MODE
1.Press to highlight 'TV Display'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
4:3 PANSCAN
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
4:3 LETTERBOX
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
16:9
If you have a wide-screen TV,then you can select the item.
.
to highlight the selected item.
18