Table of Contents
Advertisement
SETUP Menu Setting
General Operation&General Setup Page
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to
enter
selection.
3.Press
to enter the submenu or returen to the previous menu
4.Press
to highlight the desired menu.
To exit from the menu
Press SETUP
The settings will be stored in the player's memory
even if the player is switched off.
General Setup Page
The options included in General Setup page are:" TV Display","Angle
Mark","OSD lang","SPDIF Output","Captions","Screen Saver".
Follow the steps below:
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
1.Press SETUP to enter the setup menu.
2.Press
to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
17
the next level submenu or confirm your
Dolby
- - General Setup Page - -
TV Display
PS
Angle Mark
On
OSD lang
ENG
SPDIF Output
Captions
On
Screen Saver
On
Set TV Display Mode
1.Press
to highlight 'TV Display'.
2.Enter its submenu by pressing
3.Move the cursor by pressing
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
Normal/PS
If you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be
displayed.
Wide
If you have a wide-screen TV.
Dolby
Normal/PS
Normal/LB
Wide
.
to highlight the selected item.
Advertisement
Table of Contents
