Battery Pack - VIETA CPD1010TD Owner's Manual

Identification of Controls

Battery Pack

1
1.Power charge indicator during recharging , indicator is red.If
recharging is complete, charge indicator changes to green.
2.Remote sensor.
3.Battery pack.
Battery lock knob (manual)
2
3
Detaching the battery pack to separate the battery pack,slide
Battery lock knob (auto)
the two battery lock knob to the location of ¡°
the battery pack at the same time.
Warning:
For production safety, This DVD player was designed current protection.
When you charging battery and when DVD player is power on ,the charging
mode is " SLOW , when DVD player is power off, the charging mode is FAST .
The indicator turns to green when charging completed.
N
Note: In SLOW charging mode , charge time is approximate twenty hours.
In
Charge the battery pack before using it for the first time.
Attaching the battery pack
1.Silde the battery lock knob(manual) to the location of ¡°
2.Match the hooks of the battery pack into the holes on the
bottom of the player.
3.Combine the battery pack to push up until you can
hear the click sound.
4.Slide the battery lock knob(manual) to the location of ¡°
"
" "
" FAST " charging mode, charge time is approximat five hours.
¡±
¡±
¡±then pull.
" "
6