Connecting The Antenna; Connecting Control Cable - VIETA VMD650IP Owner's Manual

Connecting the Antenna

Connecting the Antenna
Connecting the Antenna Connecting the Antenna Connecting the Antenna
-
1. Using the supplied wire Antenna.
2. Using the coaxial type connector .
A 75Ohm antenna with coaxial type connector should be connected to the FM 75 ohm coaxial
terminal.
3. If reception is poor, connect the outside antenna.
Note: Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside Note:
Note: Note:
antenna), disconnect the supplied FM wire antenna.
Caution: Caution: To avoid noise, keep antennas away from the system, the connecting cord and the AC Caution:
Caution: Caution:
cord.

Connecting Control Cable

Connecting Control Cable Connecting Control Cable
Connecting Control Cable Connecting Control Cable
Terminal board for the DVD player
Terminal board for the Amplifier
/
Connect signal line between the DVD Player and
the Amplifier back board.
5
0