Connection; Connecting The Tv - VIETA VMD650IP Owner's Manual

Connection

Connection Connection
Connection Connection
Caution: Caution:
Caution: Please turn off all the equipment power before connecting. Caution: Caution:

Connecting the TV

Connecting the TV
Connecting the TV Connecting the TV Connecting the TV
Terminal board for the DVD player
1. This DVD player has video output mode, you can choose it to connect with the TV terminal.
2. If your TV has component input terminal, then you can use the signal connecting cable to
connect with the DVD player's component output terminal. By doing so, the picture will be
more clear.
3. Use a S-Video cable to connect the unit to the S-Video input of a suitably equipped television.
Use this connection in preference to a composite.
4. Use a SCART cable to connect the unit to a SCART compatible television.
Caution: To avoid affecting the picture output, do not connect video, component, SCART and
S-Video at the same time.
1 0 /
4
-
TV