Connecting The Ac Power Cord; Installation Of Batteries In The Remote Control - VIETA UNO VU100 User Manual

Connecting the AC Power Cord

Connecting the AC Power Cord
Connecting the AC Power Cord Connecting the AC Power Cord Connecting the AC Power Cord

Installation of Batteries in the Remote Control

Installation of Batteries in the Remote Control
Installation of Batteries in the Remote Control Installation of Batteries in the Remote Control Installation of Batteries in the Remote Control
1. Remove the battery compartment cover.
2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity
diagrams in the battery compartment.
* About half a year of normal operation can be expected when using normal batteries.
* When the batteries are exhausted, the commander can no longer operate the system.
Replace both batteries at the same time with new ones.
* Do not use an old battery with a new one.
* Do not use different types of batteries together.
* When the unit is not used for a long period of time, remove the batteries to avoid damage
caused by battery leakage and corrosion.
Insert the AC power cord into a wall outlet, and your
system is at your command!
Caution: Be sure to unplug the power cord from the Caution: Caution: Caution: Caution:
outlet when going away or the system is not in use for
an extended period of time.
6