Rds (Radio Data System) Reception; Clock/Timer Functions; Setting The Clock - VIETA UNO VU100 User Manual

RDS (Radio Data System) Reception

RDS (Radio Data System) Reception
RDS (Radio Data System) Reception RDS (Radio Data System) Reception RDS (Radio Data System) Reception
Many FM stations are broadcasting added data compatible with RDS. This radio set offers
convenient functions using such data.
Š Š Š Š Š
PS (Program Service Name) PS (Program Service Name) PS (Program Service Name)
PS (Program Service Name) PS (Program Service Name)
When an RDS station is received, the RDS indicator lights and automatically displays the
name of that station instead of the frequency. When RDS display button (RDS)
control is pressed during PS display, the CT is displayed for 3 seconds, then PS display
returns.
Š Š Š Š Š
PTY (Program T PTY PTY PTY PTY (Program Type) (Program T (Program T (Program T ype) ype) ype) ype)
Program type identification signal. (Example: News, Rock, Classical music.)
Š Š Š Š Š
CT (Clock T CT CT CT CT (Clock T (Clock T (Clock T (Clock Time System) ime System) ime System) ime System) ime System)
The CT system may not properly operate in areas where RDS CT service is not available.
Once CT service is received, the CT system keeps operating. "RDS CLOCK" is displayed in
areas where no CT services are available.
Š Š Š Š Š
Changing Display Changing Display Changing Display Changing Display Changing Display
During PS display, press the RDS display button ( ( ( ( (
select the CT, PTY or Frequency. They will be displayed for 3 seconds, then the PS display
returns.
Clock/T Clock/T imer Functions imer Functions

Clock/Timer Functions

Clock/T Clock/T imer Functions imer Functions

Setting the Clock

The built-in clock shows the correct time in the display.
- In standby mode, press the clock button (
panel of the DVD Player , the hour indicator will blink.
- Set the hour with the
- Press the clock button (
- Set the minute with the
- Press the clock button (
seconds start counting from 0.
Note: Note: Note: Note: Note:
Š
If you tune to a station that has RDS, (CT) clock time will be set
automatically.
Š
You can only set the clock in standby mode.
Š
The operating time of every step shouldn't be longer than 10 seconds or it will
return to the original display.
Š
If there is a power failure or the power system is turned off, the clock will lose its
setting.
) ) ) ) ) on the remote control repeatedly to
RDS RDS RDS RDS RDS
CLOCK CLOCK CLOCK
CLOCK CLOCK
+ + + + + - - - - -
button or button.
), the minute indicator will blink.
CLOCK CLOCK CLOCK CLOCK CLOCK
+ + + + + - - - - -
button or button.
), the built-in clock starts operating and the
CLOCK CLOCK CLOCK CLOCK CLOCK
17
(RDS) on the remote (RDS) (RDS) (RDS)
) on the remote control or on the