Connecting The Antenna; Connecting Assistance Equipment; Connecting Coaxial - VIETA UNO VU100 User Manual

Connecting the Antenna

Connecting the Antenna
Connecting the Antenna Connecting the Antenna Connecting the Antenna
-
1. Using the supplied wire Antenna.
2. Using the coaxial type connector .
A 75Ohm antenna with coaxial type connector should be connected to the FM 75 ohm coaxial
terminal.
3. If reception is poor, connect the outside antenna.
Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside Note: Note: Note: Note:
antenna), disconnect the supplied FM wire antenna.
Caution: To avoid noise, keep antennas away from the system, the connecting cord and the AC Caution: Caution: Caution: Caution:
cord.

Connecting Assistance Equipment

Connecting Assistance Equipment Connecting Assistance Equipment
Connecting Assistance Equipment Connecting Assistance Equipment

Connecting Coaxial

Connecting Coaxial Connecting Coaxial
Connecting Coaxial Connecting Coaxial
/
This DVD Player has one groups of AUX IN
terminal, you can use signal line to connect this
player's AUX IN terminal and assistance
equipment's audio output terminals respectively,
then you can hear the sound sources.
Caution: When you are connecting AUX audio Caution: Caution: Caution: Caution:
terminals, please press the function select button
on the DVD Player to select AUX
FUNCTION FUNCTION FUNCTION
FUNCTION FUNCTION
function.
Use coaxial fibre cable to connect the DVD
player's coaxial fibre output jack with other
amplifier's coaxial fibre input jack, for superior
digital sound effects.
5
0